Jims Mobile, Inc. (JMI) - Carrying Case for Meade LX 10 inch

for Meade LX50 10", LX90 10", LX90GPS 10", LX100 10", LX200 10" (non-GPS), LX200GPS 10", LX200R 10"

JMI Carrying Cases include crush-resistant die-cut foam, contoured to safely hold your telescope during transport. The larger
cases are manufactured by JMI with 1/4″ plastic for super strong support. Most cases include an extra handle on one end with
wheels on the opposite end for easily maneuvering the case without lifting the entire weight. These attractive and efficiently
designed cases are substantially smaller than the original shipping box and even smaller than most soft cases. They protect your
investment while making it easier to move your scope from one location to another.

The case includes four lockable latches, three steel-reinforced handles, a 3" by 30" steel hinge and die-cut foam lining with
compartments for telescope, eyepieces, finder scope and accessories.  The finder scope must be removed from the telescope and
placed in a special vinyl cover included with the case.  The Meade Microfocuser on the GPS scope must also be removed and placed
in a foam compartment in the case.  Three thumbscrews are provided to replace the focuser's original mounting setscrews, for easy
removal and reinstallation.  The case can be carried or pulled using the attached wheels.  Optional upgrades include the
Large-Wheel Upgrade and Retractable Handle Upgrade (best if installed at time of purchase).

When used for the Meade LX90, the LNT Module and SmartFinder must be removed and stored in the case.  An adapter bracket is
included (see below) for instant accurate repositioning when attaching the LNT Module.

Outside dimensions of the case are approximately 36-3/4" x 24-5/8" x 16-1/2" and its empty weight is approximately 26.2 lbs.  The
shipping box is approximately 26-1/4" x 19" x 38-3/4" (FedEx Ground dimensional weight is 100 lbs) and the shipping weight is
approximately 34.1 lbs.  All values are subject to slight changes.

Cases

JMI Carrying Cases include crush-resistant die-cut foam, contoured to safely hold your telescope during transport. The larger
cases are manufactured by JMI with 1/4″ plastic for super strong support. Most cases include an extra handle on one end with
wheels on the opposite end for easily maneuvering the case without lifting the entire weight. These attractive and efficiently
designed cases are substantially smaller than the original shipping box and even smaller than most soft cases. They protect your
investment while making it easier to move your scope from one location to another.